Manual, Foldaway Stop

When loading and/or unloading block size loads using ROLLERFORKS®, the ability to do so from the pallet's short or long side can be particularly useful. However, depending on the load, this can sometimes be problematic because the load slides too far onto the ROLLERFORKS®. Imagine that the ROLLERFORKS® are 1200 mm long and the load (1000 m wide) is being lifted from its long side. If the ROLLERFORKS® were rolled all the way under the load up to their backboard, then they would extend from beneath the load by 200 mm. In such cases, a manually operated, foldaway stop could be used. Folding out the stop effectively shortens the ROLLERFORKS® by 200 mm, thus preventing any damage to goods positioned behind the load being lifted.